Warm Audio Direct Box Active and Passive

Warm Audio Direct Box Active

The guys at Warm Audio are really covering their bases. They’ve taken their concept of adding vibe to every section of your signal chain even further by catching your sound at the very beginning of your chain.

Whether you play guitar, bass, keyboards or another stringed instrument, you’ll need a direct box that won’t diminish your instrument’s tone, like the Direct Box Active and Direct Box Passive from Warm Audio.  Every aspect of our direct boxes are designed for maximum sonic integrity, from the custom-wound CineMag USA transformer to the rugged metal knob and switches.  You can expect warm, rich tone even after long cable runs, and the extruded aluminum enclosure ensures a long life span.  When you need to convert an instrument-level signal to mic-level, with sonic quality as your top priority, you’ll be well-served with the Direct Box Active and Direct Box Passive from Warm Audio.

Built around world-famous CineMag USA Transformer topology and engineering, like no other DI Boxes in the world. Constructed with top-tier discrete components housed in rugged aluminum chassis’ that include switches, knobs and connectors that are all designed to withstand heavy abuse on the road or in the studio.

LIKE NO OTHER DI BOXES
The Direct Box Active & Passive by Warm Audio are stunningly transparent. It will not diminish your instrument’s original sound or tone in any way…other than making it sound better. 

NEW DI BOX EXPERIENCE
Rare versatility of having an onboard variable pad which attenuates your input signal anywhere from -3dB to -30dB.  This allows you to easily tame any instrument’s input source. 

TYPICAL APPLICATIONS FOR A DI BOX 
Connecting electronic instruments such as guitar, bass, keyboard, or drum machines directly to a PA or recording system. Simply put, a DI box converts the high impedance, unbalanced output signals to low impedance, balanced output signals. By doing so, the instrument signals are now converted to the proper voltage level for the PA or recording system – which greatly reduces and/or eliminates connections which could cause tonal shifts and distortion.

DIRECT BOX ACTIVE vs. DIRECT BOX PASSIVE
Direct Box Active is best for instruments with passive pickups, especially acoustic instruments.  The Direct Box Active can also operate in “passive” mode. Direct Box Passive is best for balancing the signal of instruments with active electronics, but still performs extremely well on passive pickups by producing a frequency range that exceeds the bandwidth of most passive DI boxes on the market.

DIRECT BOX ACTIVE – CONVENIENCE JACK
Both of our Direct Boxes offer a Thru-put jack that is jumpered to the input jack. It is a convenience jack allowing you to send your instrument’s signal to a second place in addition to the live mixer or recording device. Our Direct Boxes can also take a recorded signal at line level and send it to another line input while simultaneously sending signal out of the XLR mic level output of the Direct Box.

DIRECT BOX ACTIVE – SPECIFICATIONS• Custom-wound CineMag USA transformer.
• Converts instruments to mic-level signals without signal degradation.
• Ideal solution for plugging your instrument direct into any mic pre, mixer or recording device.
• Top-quality discrete components with gold-plated traces on circuit board. 
• Rugged aluminum chassis construction.
• Pad: Variable from -3dB to -30dB.• Balanced Output: 600 ohms, mic level.• Input Impedance: 1 Meg Ohms.• THD: .01% from 20Hz to 50Hz. Less than .003% from 50Hz to 20kHz.• Frequency Response: 10Hz to 90kHz +/- 0.5dB.• Linear Performance: +/- 0.05dB 20Hz to 50kHz.• Power: 48V Phantom or two 9V batteries. Can also be used passively.

DIRECT BOX PASSIVE – SPECIFICATIONS• Custom-wound CineMag USA transformer.
• Converts instruments to mic-level signals without signal degradation.
• Ideal solution for plugging your instrument direct into any mic pre, mixer or recording device.
• Top-quality discrete components with gold-plated traces on circuit board. • Rugged aluminum chassis construction.  • Pad: Variable from -3 to -30dB.• Balanced Output: 600 ohms, mic level.• Input Impedance: 1 Meg Ohms.• THD: .01% from 20Hz to 100Hz. Less than .004% from 100Hz to 20kHz.
• Frequency Response: 20Hz to 70kHz +/- 0.5dB.

DIRECT BOX ACTIVE
MAP = $199 USD | 219 € INC VAT

DIRECT BOX PASSIVE MAP = $149 USD | 179 € INC VAT

{{ reviewsOverall }} / 5 Users (0 votes)
Rating
What people say... Login to rate
Order by:

Be the first to leave a review.

User Avatar User Avatar
Verified
{{{ review.rating_title }}}
{{{review.rating_comment | nl2br}}}

This review has no replies yet.

Avatar
Show more
Show more
{{ pageNumber+1 }}